HuntingNet.com Forums - Update on Accura

Page 2 of 2

Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Black Powder (https://www.huntingnet.com/forum/black-powder-23/)

- - Update on Accura - Ron BP (https://www.huntingnet.com/forum/black-powder/336244-update-accura-ron-bp.html)

ronlaughlin

12-13-2010 06:53 PM

Quote:

Originally Posted by MountainDevil54 (Post 3740553)

Ron you know why i had to send it back.

The longer breech plug still was not long enough.

Yes, i do. It was too long to be used in your rifle with W209. Had you tried the CCI, you would have been pleasantly surprised. Also, you wouldn't have to unscrew the primer bushing to get a seal.

MountainDevil54

12-13-2010 07:07 PM

No it wasnt to long.

Jeesh! Now you see why its easier to send the rifle off and have the plug matched up.

This is a dead give away that the W209s were not the crush fit.

Its a whole hell of a lot easier to back the bushing out and get the custom fit than to argue.

Semisane

12-13-2010 07:30 PM

Quote:

Originally Posted by ronlaughlin (Post 3740566)

This isn't quite true. You could tell me what you want the OAL to be with your primer of choice.

Seems it would be a simple matter of measuring how far out the unscrewed firing pin housing is protruding and adding that to the length of the plug.

gman57

12-13-2010 08:42 PM

Quote:

Originally Posted by Semisane (Post 3740595)

Seems it would be a simple matter of measuring how far out the unscrewed firing pin housing is protruding and adding that to the length of the plug.

I think we have a winner!

All times are GMT -8. The time now is 11:12 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page