Omega flash hole size?
11-30-2010 | 11:03 AM
#11
Boone & Crockett
Joined: Aug 2004
Posts: 11,703
Likes: 0
From: Idaho
Garceau
That should work - if you are talking about cleaning the 'flash channel' right under the primer.
And actually if you are not shooting the really hot primers you really should not be getting much of a build up in the channel.
The drill bit things just seems to help clean the debris out as you are turning.
Easiest thing to use is copper wire, strip some wire and run it down there and great a little friction.
And actually if you are not shooting the really hot primers you really should not be getting much of a build up in the channel.
The drill bit things just seems to help clean the debris out as you are turning.
11-30-2010 | 12:48 PM
#13
Fork Horn
Joined: Nov 2009
Posts: 126
Likes: 0
From: Tennessee
Check my post "Floss your Breechplug.
http://www.huntingnet.com/forum/blac...eech-plug.html
The Oral-B dental floss has small amount of abrasive quality. Put some solvent on the spongy part of the thread and run it through 8-10 times. It cleans my Omega plug great.
http://www.huntingnet.com/forum/blac...eech-plug.html
The Oral-B dental floss has small amount of abrasive quality. Put some solvent on the spongy part of the thread and run it through 8-10 times. It cleans my Omega plug great.
