|
Lyman Deerstalker Twist
1 Attachment(s)
I have a stainless Lyman Deerstalker, in a 54 caliber (percussion) which I bought somewhere between 5 and 10 years ago, and chose it specifically because it was said to have a 1 in 32 twist while the "regular" Deerstalkers have a 1 in 48 twist. Over the years, and even at the time I purchased it, I've seen many sources that said the stainless Deerstalker was a 1 in 48 twist. Even the Lyman literature, has conflicting information on the twist of the stainless Deerstalker. So finally I contacted Lyman customer service by email and asked them to confirm for me what the actual twist was on my gun. This is the reply I got:
It would have a 1-48" twist with shallow grooves, which is better for conical use than with patched round balls. Attached is a screenshot of one source which gives the incorrect twist. It is a Lyman manual that is available online. |
Did you ask them if that model and caliber ever came in a 1-32 twist? The person that answered your question might have been a chart reader, and gave you a general answer.
I bought a Mountain Stalker many years ago. Gander Mountain now has it. When I bought it, the add said it was a 1-32 twist. When it came, the barrel was marked 1-48. Its a good roundball shooter. What kind of projectiles are you shooting out of your Deerstalker? I have always heard they are good rifles. |
Use a cleaning rod with a jag attached to measure, then you know for sure what you have...
|
I do plan on trying to measure the twist myself, then there will be no doubt.
But yes, I did email them back and asked if the Deerstalker had EVER been made with a 1 in 32 twist, and I asked if they were aware of all the conflicting information out there regarding the twist rate of the stainless model. It seems odd to me that they don't stamp the twist right on the barrel, as it is rather important to know. I have shot 348 grain Powerbelts in the past, and currently I have 330 grain hard cast Harvesters, 302 grain Buffalo Bullets, and some 300 grain Precision Rifle bullets. (all saboted bullets) |
2 Attachment(s)
Here is another quote from some other Lyman literature available online: DEERSTALKER STAINLESS The Lyman Deerstalker Stainless model has all the features of the standard blued model, but is made in corrosion resistant stainless steel. All major metal parts such as the barrel, trigger guard, lock assembly, escutcheons, and wedge are stainless steel for the greatest protection against black powder fouling and weather. The Deerstalker stainless models uses a 1 in 48" twist barrel for shooting conicals and sabots. Stainless parts have brushed finish to prevent glare. Here is the other one so we can see them together: Deerstalker Stainless The new Deerstalker stainless model is as handsome as it is functional. This highly demanded rifle features true stainless steel on all of the major metal parts such as the barrel, trigger guard, lock assembly, escutcheons and wedge. The Deerstalker Stainless is available in percussion only and has a special 1 in 32" twist for shooting modern conicals. |
1 Attachment(s)
Barrel specifications for all Lyman muzzleloaders:
|
1 Attachment(s)
More confusion, from a seller of Lyman muzzleloaders:
|
| All times are GMT -8. The time now is 09:38 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.