Black Powder Ask opinions of other hunters on new technology, gear, and the methods of blackpowder hunting.

Pitting and Accuracy

Old 07-10-2010 | 09:11 AM
  #1  
Thread Starter
Nontypical Buck
 
Joined: Dec 2006
Posts: 2,037
Likes: 0
From: Minnesota
Default Pitting and Accuracy

Here is something I have never quite figured out.
A lot of my guns were purchased used, actually of the front loaders I own now I only bought two of them new.
Now when you buy these used guns over the net you just never know how well they have been taken care of. I have been pretty fortunate for the most part. One of my barrels has always kind of concerned me. If you look down it hard, in the right light, you can see a little ring about where the powder and the bullet would meet. And if you really look hard you can see slight pitting in the barrel. It is not something you can feel when you are swabbing but it is there. Now this is one of the best shooting guns I have ever shot, bar none. I have other bores that are pristine and I cannot get the same kind of accuracy out of them.
I would like to hear the opinions of some of you on this phenomenon.
Art
flounder33 is offline  
Reply
Old 07-10-2010 | 09:46 AM
  #2  
Semisane's Avatar
Boone & Crockett
 
Joined: Apr 2007
Posts: 10,918
Likes: 1
From: River Ridge, LA (Suburb of New Orleans)
Default

I've played with a few TC Renegade and Hawken barrels that had obvious pits and they shot just fine. They did accumulate fouling though. You just have to do a real good cleaning job on them to make sure the fouling is out of the pits. But I do a complete flush after a range session anyway, so it's no big deal.

Now I'm talking patched round balls here. A pitted bore may behave differently with full bore conicals or sabots. But come to think of it, I had a pitted .50 Renegade barrel that shot 250 grain XTPs in Harvester sabots quite well.
Semisane is offline  
Reply
Old 07-10-2010 | 10:09 AM
  #3  
hunt12ga's Avatar
Typical Buck
 
Joined: Feb 2010
Posts: 650
Likes: 0
From: Southern Illinois
Default

My dad has a CVA Kentucky rifle in .45 that he built as a kit about 25 or 30 years ago. He is very bad about taking care of guns. This gun hangs over the fireplace in the unused family room that gets no air conditioning, and the humidity plays he77 on it. It is the most awful looking thing I've seen, all rusted and pitted. But that rifle will drive nails at 50yards (his comfortable range) with PRB's. The deer can't tell it's not smooth and shiny!

rw
hunt12ga is offline  
Reply
Old 07-11-2010 | 06:07 AM
  #4  
cayugad's Avatar
Dominant Buck
 
Joined: Feb 2003
Posts: 21,193
Likes: 0
From: Wisconsin
Default

I own a couple like you described. When you purchase them they seller tells you ... " there are a few marks in the barrel." A few marks!! But they seem to shoot well. My Knight LK-93 is that way. But he sold it for $75.00 shipped. I figured the other parts were worth that. But discovered it is a real good shooter.
cayugad is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.