Originally Posted by fusion (Post 3552391)

I purchase the Accura back in December and had a little issue with this as well. The screws that came with the Dura sight mounts seem to be too big for the threads in the Barrel. After a call to CVA to verify the correct size screw which it was. I went back and tried with what I thought was nothing to lose because if it was the right screw and properly drilled and tapped from the factory it would not be my fault is threads got stripped . It ended up being it was just real tight to get started but once you got past the first few threads they went right in. So give that a try as long as you have confirmed the screws you have are proper size.

Originally Posted by fusion (Post 3552391)

I purchase the Accura back in December and had a little issue with this as well. The screws that came with the Dura sight mounts seem to be too big for the threads in the Barrel. After a call to CVA to verify the correct size screw which it was. I went back and tried with what I thought was nothing to lose because if it was the right screw and properly drilled and tapped from the factory it would not be my fault is threads got stripped . It ended up being it was just real tight to get started but once you got past the first few threads they went right in. So give that a try as long as you have confirmed the screws you have are proper size.

Originally Posted by cozumel (Post 3552280)

Does anyone out there have any information about T/C Omega with Weather Shield Barrels,,,, rust, corroding, etc? Also are they accurate out to 100yds.? Any information will be appreciated.




N.R.A. Life Member,,,,You should be too!

Originally Posted by Josmund (Post 3556838)

Cozumel,

I can't speak for the Weathershild Barrel. I can speak on the accuracy of the Omaega. I'm sure most people on this board will agree the can be very accurate when dialed in. Let me know if you want to know what my Omega like to shoot.