HuntingNet.com Forums - Fast twist barrel blanks?

Quote:

Originally Posted by Screwbolts (Post 3428469)

Here ya go

, http://www.e-gunparts.com/DisplayAd....rSuperSKU=&MC=

from there main menu, got to "Start here "

Then click on "gunsmithing"

then Click on" Barrels and components"

This ram rod can be cut down, It is a quality rod. I have 3 in invitory for future projects.

http://www.e-gunparts.com/DisplayAd....rSuperSKU=&MC=

ken

I got the Denali barrel today...thank you! This will work great. There will be a little extra work over an octagonal blank due to the tapering and rounded surface complicating fabricating a mounting lug, and needing to cut off the breech taper and rethread the thick part for a plug, but this will work perfect and you can't beat $37 for a barrel!