HuntingNet.com Forums - Knight Wolverine stainless

Page 2 of 2

Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Black Powder (https://www.huntingnet.com/forum/black-powder-23/)

- - Knight Wolverine stainless (https://www.huntingnet.com/forum/black-powder/298355-knight-wolverine-stainless.html)

cayugad

07-20-2009 07:56 PM

I just ordered two of the hex head ones. They have the same number as on the Knight Rifle site. I measured the breech plug and (of course the nipple is missing) it is 1.503 according to the caliper. Hope that helps.

flounder33

07-23-2009 02:16 PM

Was that a regular knight hotshot nipple that came apart like that?
Art

WVCritter

07-23-2009 03:04 PM

Quote:

That 85 grains of Triple Seven 2f and that 250 grain XTP has a pretty good bark to it. Should be all that is needed.

Cayugad, That's what I shoot in my Woverine and it's a deadly combination for whitetail. I've shot 1 1/2 to 2 inch groups at 100 yards with that load but I don't think I could do it with a 1x32 scope. Mine's fitted with a 3x9x42 scope and also uses the #11 precussion caps. Great shooting.

All times are GMT -8. The time now is 12:49 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page