Anybody have an extra breech plug wrench for a CVA?
 

I just picked up a breech plug wrench (supposedly a universal one) and it doesn't work with my CVA ml. Just wondering if anybody had an extra one that they wouldn't mind parting with. I would be happy to pay shipping, and even a couple of $$ for your time.

RE: Anybody have an extra breech plug wrench for a CVA?
 

I use a 1/4" drive 12mm socket on my Accura, works great.

RE: Anybody have an extra breech plug wrench for a CVA?
 

Depending on which model you need, I am sure CVA would sell you one. When I asked for a trigger screw and they sent me a parts list and order form, a breech plug wrench was on that list for a CVA Staghorn Magnum. And I might add, that's a great wrench. I use that one on a lot of my other rifles as well because of its length.

RE: Anybody have an extra breech plug wrench for a CVA?
 

Let me know i have 3 for the staghorn if your gun takes that style

RE: Anybody have an extra breech plug wrench for a CVA?
 

My CVA Wolf takes the same, 12mm socket.

RE: Anybody have an extra breech plug wrench for a CVA?
 

I use a socket

RE: Anybody have an extra breech plug wrench for a CVA?
 

My breech plug has two indented notches on each side like screwdriver notches then the nipple goes in the middle.

RE: Anybody have an extra breech plug wrench for a CVA?
 

That sounds like one of the older breech plugs because you can change from a #11 or musket cap or even a 209 primer with the right plug. I just purchased a breech plug for my staghorn. Not that I needed one, but the other one has had hundreds maybe even a thousand shots through it, and still it shows no wear. That to me is not normal. So since I had to purchase my one dollar screw, I ordered a breech plug from them at the same time.

If it is the breech plug I am thinking of..



the one end removes the nipple and the other end remove the breech plug. It comes with a small breaking bar and an allen wrench to remove the necessary bolts.. is this theone you need? Those are the CVA parts numbers. You could make one from some round stock if you are handy...

RE: Anybody have an extra breech plug wrench for a CVA?
 

I just received the new 2009 Catalog from CVA and I see there discontinueing a couple of their ML's. The Kodiak Mag is gone and the Kodiak Pro is on it's way out with just the ss/bk and bl/bk models left, no camo/ss or laminated, there being replaced by the Elkhorn Pro. The Buckhorn has already replaced the Staghorn so I'd get what parts I can befor the stock runs low on the discontinued models if you need them. Now CVA's cheapest model is at $156.95 (Buckhorn) no more cheap priced ML's from CVA.

RE: Anybody have an extra breech plug wrench for a CVA?
 

If the one you need is what cayugadhas a pic of, let me know i have 3 of them i will be glad to help

RE: Anybody have an extra breech plug wrench for a CVA?
 

TUK101Here is a pic of acouple ofbreechplugs the one on the left is for #11 or muskett caps,the right side
of it is messed up,it should look like the left side.The one on the right is for 209 primmers either way they both
take the same tool the one above them inthe pic

RE: Anybody have an extra breech plug wrench for a CVA?
 

I think that is it, the one that Cayugad is displaying. I take it that the left side of the picture is the side that gets the breech plug out? I am able to get the nipple out with a 3/8 socket. If you have one huntingjunkie I would surely like to get one from you. I need to get that breech plug out before it rusts solid in there.

RE: Anybody have an extra breech plug wrench for a CVA?
 

huntingjunkie, the one that you are showing is the universal one that I bought that didn't fit. I could probably make one out of a piece of flat stock it I tried.

RE: Anybody have an extra breech plug wrench for a CVA?
 

Why won't it work,can you explain? What kind of gun is it? When you slide the wrench inare you pulling the trigger
and holding it so the wrech fits in there better

RE: Anybody have an extra breech plug wrench for a CVA?
 

Because my breech plug end isnt octogon. It has two horizontal slots in it that the wrench fits into. Pretty close to what you are showing, and maybe the left side of your wrench is the right end, but by the picture I cannot tell for sure. It could just be me too, I am not real familiar with these types of muzzleloaders. Mine is the CVA Apollo.