HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Black Powder (https://www.huntingnet.com/forum/black-powder-23/)
-   -   Attn. UC Hope This Picture Helps (https://www.huntingnet.com/forum/black-powder/279611-attn-uc-hope-picture-helps.html)

WV Mountaineer 12-22-2008 12:41 PM

Attn. UC Hope This Picture Helps
 

Underclocked 12-22-2008 12:57 PM

RE: Attn. UC Hope This Picture Helps
 
Much better. Now we need one of the corresponding cut in the cam - and similar ones of an older model.

Semisane 12-22-2008 02:09 PM

RE: Attn. UC Hope This Picture Helps
 

Now we need one of the corresponding cut in the cam - and similar ones of an older model.
Somebody better give him those pictures. You know how UC can get when he doesn't get what he wants. :D

TNHagies 12-22-2008 02:26 PM

RE: Attn. UC Hope This Picture Helps
 
Well, I sold my blue/black one when I got my laminate thumbhole one. That would have fit the bill. I think I bought it 2 or 3 years ago. I'll check when I get home and see if I have any pics of the cam. I think I recall taking some of the action for a guy who was looking about building me a custom stock for it. There used to be a guy on here Roskoe I think was his screen name that bought his the same month I did. Haven't seen him around for a while though.

TNHagies 12-22-2008 03:48 PM

RE: Attn. UC Hope This Picture Helps
 
Ok so I looked through my images and this is as close as I can find. I have none of the actual face of the cam. I took a similar one just now of the new one for comparrison. After looking at the image of the old one I am now convinced that the finish of the older ones was different. It was a lot smoother and glossy.









That being said, I had buildup on the face w/all powders except BH. After about 8 shots or so I would have to wipe it as it would get hard to open. It will be interesting to see if the new finish is better or worse than the old one.

WV Mountaineer 12-23-2008 08:08 AM

RE: Attn. UC Hope This Picture Helps
 

Underclocked 12-23-2008 08:27 AM

RE: Attn. UC Hope This Picture Helps
 
Perfect of that one!

an yes, ah'm about ta thro aconniption fit!! :D

Someone explain to me the why of that trigger-block safety. Did they expect you to be walking around with the rifle cocked? [:-]


ps: ah wunder how u kin tell whut brand dat riful iz? :D :D ;)

Gotbuck 12-23-2008 11:53 AM

RE: Attn. UC Hope This Picture Helps
 
How is that gun on blowback? Or does it not exist due to the cam?

WV Mountaineer 12-23-2008 02:50 PM

RE: Attn. UC Hope This Picture Helps
 
Gotbuck I have not shot it yet but I will be sure and let you know about the blowback when I do.

SWThomas 12-23-2008 06:57 PM

RE: Attn. UC Hope This Picture Helps
 
I haven't fired mine yet either but from what I've heard the blowback isn't that bad.


All times are GMT -8. The time now is 05:58 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.