recovered the reinforced powerbelt 245g
#1
Thread Starter
Join Date: Jul 2006
Location:
Posts: 5,180
recovered the reinforced powerbelt 245g
I shot that 245g HP powerbelt that i modified to see what would happen. I found it while looking through the sand box for round balls.
WOW! I may consider making quite a bit of these and use them for hunting and see how they do.
I'll post pics as soon as i am finished with the lead hunt.
With the GPR, i can tell you this... A .015 patch sucks major butt.
WOW! I may consider making quite a bit of these and use them for hunting and see how they do.
I'll post pics as soon as i am finished with the lead hunt.
With the GPR, i can tell you this... A .015 patch sucks major butt.
#2
Thread Starter
Join Date: Jul 2006
Location:
Posts: 5,180
RE: recovered the reinforced powerbelt 245g
Here she be. I'll post more. Right now the lap top i am using only has explorer and it screws up with photobucket and only lets me load one pic at a time.
While looking through my sand box i smelled fire. I thought that was odd since its 80+ degrees out today. Walking back to my shooting area the smell gets stronger and i look down to find this!
That powder that was getting blown out of the barrel from the GPR and 90g ffg goex landed on this log that has some really rotten/punky wood and it started to smolder and spread pretty quick in a matter of minutes.
Shooting path,
While looking through my sand box i smelled fire. I thought that was odd since its 80+ degrees out today. Walking back to my shooting area the smell gets stronger and i look down to find this!
That powder that was getting blown out of the barrel from the GPR and 90g ffg goex landed on this log that has some really rotten/punky wood and it started to smolder and spread pretty quick in a matter of minutes.
Shooting path,
#3
RE: recovered the reinforced powerbelt 245g
Is the pointy end the front or the back?
Did a patch land on that stump? That sure is food for thought. Wouldn't happen here though. Other than yesterday morning it's been raining steady.[:'(]
Did a patch land on that stump? That sure is food for thought. Wouldn't happen here though. Other than yesterday morning it's been raining steady.[:'(]
#7
Thread Starter
Join Date: Jul 2006
Location:
Posts: 5,180
RE: recovered the reinforced powerbelt 245g
I took a screw that fit tight in the Hollow point, cut it down to fit flush and then used a bit of jb weld to hold in place. Other than that, I just replaced the plastic aerotip with a steel flat tip.
#8
RE: recovered the reinforced powerbelt 245g
That seems like a bit of work. I would be worried about consistency. If you are off center your bullet may start to wobble or tumble.
Why not just use Nosler Partitions and save all the grief?
Why not just use Nosler Partitions and save all the grief?
#10
RE: recovered the reinforced powerbelt 245g
Good enough for me I suppose. lol
Don't the PB's have something like you toying with. Something for dangerous game?? with a steel core?
Don't the PB's have something like you toying with. Something for dangerous game?? with a steel core?