Shot Patches From The GP
 

I posted this picture on another forum in response to a question, so I thought I may as well post it here also.

These are some shot patches with Wonder Wads from my GP flinter using 95 grains FFFg.

RE: Shot Patches From The GP
 

amazing how good of a condition the patches are in with the use of a simple bore button...

RE: Shot Patches From The GP
 

Right, not burned any or torn. Great. Chap

RE: Shot Patches From The GP
 

They liik like you could use them again.

RE: Shot Patches From The GP
 

When putting the bore button in the barrel, How do you get it to lay flat on the powder?

RE: Shot Patches From The GP
 

It doesn't seem to want to turn sideways, or get cocked. When I first started using them I would seat the button on the charge with therod before I loaded the bullet. Then I started just pushing the button in about 1/4" with my finger, loading the bullet, and ramming the whole works down together. I've never had one not go down flat on the charge. I can tell by the witness mark on the ramrod that the button is laying flat.

RE: Shot Patches From The GP
 

Thanks Semi.

I take it that their just thick felt button cut to bore dia? Are they lubed at all? Also, those patches look an awful lot like my dishtowels????

RE: Shot Patches From The GP
 

Heres a .018 pillow ticking patch lubed with borebutter. Recoverd from my GP with 90 grains FFg. I am going to try some TC prelubed .015 patches tomorrow after the Powerbelt testings. Got some all lead powerbelts to try out.

RE: Shot Patches From The GP
 

:DIf you had a matching table cloth for those dishtowels, it may be the same fabric. Those patches were cut from a 48 X 72" table cloth I bought at a GoodWill second hand store for $2. They work great in both the GP and my Zouave.

RE: Shot Patches From The GP
 

Hey gander, are you cutting that pillow ticking into round patches? I used to do that. Found a simple square cut works just as well.