my first cast bullets
 

yesterday, I got about 5 mins of good out door time before the wind kicked up to 35-45 mph. only got 4 to come out got enough for me to try out of my ML.

214gr .429 (more like .430) swc



hoping to get some time tomarrow to get a better cast, tried alittle while ago only can do it outside right now. may get a chance tomarrow in the house. ;)

RE: my first cast bullets
 

Corey

From what I can tell they look pritty good let us know how they shoot for you.

Ron

RE: my first cast bullets
 

once I can get to the range.;)

RE: my first cast bullets
 

What mold are you useing there?

RE: my first cast bullets
 

If you warm the mold by puting the bottom front cornors in melted lead or warming the bottom over the stove before you start it will help [now I did say warm that only about half the temo. of melted lead] and a small peice of bees wax syired in after the leads melted helps to; Be carful! make sure there is no moisture at all in the molds before you start to pour if there is it will turn to steam and spit melted lead all over. Lee

RE: my first cast bullets
 

lee 429-214-swc
#90336

I am planning down the road on getting a flat nose or round nose and a round ball mold and real bullet

RE: my first cast bullets
 

I just noticed your in Virgina..You mean you have bad weather down there
as well..My sister is in Chester,outside of Richmond..She said it was pretty
windy there,but she had her back door open yesterday..Right now it is
6 degrees outside and howling winds from the North...
Thanks for the mold information...

RE: my first cast bullets
 

it cold now, I am trying get started back up I am in the house doing it.

RE: my first cast bullets
 

Your wife is going to kill you man..

RE: my first cast bullets
 

she is at work, I will have it cleaned u before she gets home