50 cal t/c flint lock barrel
#1
Thread Starter
Spike
Joined: Aug 2007
Posts: 93
Likes: 0
Could any tell me were were I can find a 50 cal flint lock barrel? It's for a older renagade, I have the 54 cal barrel. In my area it's hard to find anything for a 54 tired of have to drive 70 miles to cabelas. or have to order every thing .THANKS
#2
Nontypical Buck
Joined: Dec 2005
Posts: 3,246
Likes: 0
From:
ORIGINAL: sup
Could any tell me were were I can find a 50 cal flint lock barrel? It's for a older renagade, I have the 54 cal barrel. In my area it's hard to find anything for a 54 tired of have to drive 70 miles to cabelas. or have to order every thing .THANKS
Could any tell me were were I can find a 50 cal flint lock barrel? It's for a older renagade, I have the 54 cal barrel. In my area it's hard to find anything for a 54 tired of have to drive 70 miles to cabelas. or have to order every thing .THANKS
Fox Ridge sell TC Barrels: To contact Fox Ridge, call 1-800-243-4570, they'll be happy to assist you.
Chap Gleason
#5
Nontypical Buck
Joined: Aug 2005
Posts: 1,081
Likes: 0
From: New Mexico
The Green Mountain barrels are top notch production barrels. They make the barrels for the Knight rifles.
Here is a link to Midway's listing for the barrels.
http://www.midwayusa.com/ebrowse.exe/browse?TabID=5&Categoryid=10431&categoryst ring=10635***
They are out of stock but backorders are OK and the price is a bit cheaper than what you quoted.
Here is a link to Midway's listing for the barrels.
http://www.midwayusa.com/ebrowse.exe/browse?TabID=5&Categoryid=10431&categoryst ring=10635***
They are out of stock but backorders are OK and the price is a bit cheaper than what you quoted.
#8
Track of the Wolf has the GMBflintlock barrel with a 1-70 twist for shooting roundball. If you want I fast twist flintlock I think they are out of stock with them... That 1-70 will really throw a good accurate roundball though with lots of power to it..
Since your rifle is the Renegade you are a 1" on the flats. Not the 15/16th. Also some trimming of the thimb rib with a dremel might be necessary to make the barrel drop into place. So if it does not go in easy, you can trim the stock, or trim the barrel.
Since your rifle is the Renegade you are a 1" on the flats. Not the 15/16th. Also some trimming of the thimb rib with a dremel might be necessary to make the barrel drop into place. So if it does not go in easy, you can trim the stock, or trim the barrel.
#10
Fork Horn
Joined: Dec 2004
Posts: 141
Likes: 0
From:
Like anything else that works way too good; it gets discontinued. Glad you got one! Those are the sweetest shooting barrels I have ever seen. You got a heck of a price on that as well!


