New GM .54 barrel arrived.............
 

I ended up getting a .54 GM barrel after all. I decided on the 1-70 twist to start with and will eventually pick up a 1-28 down the road.The Renegade stock didn't require any inletting at all just dropped in.Picked up a new unopened TC .530 ball mold and will now have to play around with patch size.Have the bear baits out since last Sunday so they should be hit in a week or so hopefully.Should I start at 80gr of 2F 777 and work my way up?The barrel has regular sights and not the fiber optic type.Could be old stock.Sure is long compared to the factory unit.............Harold

RE: New GM .54 barrel arrived.............
 

Let us know how the new barrel shoots,I am thinking on a GM barrel in 54 cal. but looking for a 15/16 across the flats,seem I have an extra lock for a PA HUNTER STOCK which has a 15/16 barrel channel.
The older GM barrel s had stock sight with a front gold bead

RE: New GM .54 barrel arrived.............
 

That is a great barrel. I know it will be a good shooter. All you need is about 90 gr of powder and a patched roundball. I personally shoot pillow tick with ball out of my Green Mountain Barrel with moosemilk as a lube. Keep us posted about how well the rifle shoots..

Good luck..

RE: New GM .54 barrel arrived.............
 

My Gm .54 barrel didn't start to group until I had put 17 or 18 shots through it.Now it gets better every time I take it out.I had to use .020 patches,thinner ones did not survive,burned up,and then only with 70 grs. of 777.They burn through with more powder.15 grs. or soof cornmeal on top of the powder will allow you to increase the powder charge.That or them costly felt wads.I use hoppes #9 plus for patch lube.I have shot 50+ times without wiping between shots even with GOEX 2f.

RE: New GM .54 barrel arrived.............
 

I went up to Walmart to look for pillow ticking but all they had was thin white stuff that looked more like parachute material.100% cotton but paper thin.Any suggestions? Old denim pant legs etc..?Pre-cut .020 patches ran about $8/100 @ the local gun store so I'd rather buy bulk.........................Harold

RE: New GM .54 barrel arrived.............
 

I couldn't get walmart pillow ticking to survive the tripout the barrel.Maybe the thread count per inch is to low.It may work with real black powder.777 burns hotter than the real thing.You can try midsouth shooters supply,track of the wolf,the log cabin,or midway.They all have patches cheaper than $8.00 @100.The denim blue jeans pant legs I tried was about .030-.035 thick,tough to load.If you find something in bulk thick enough be sure wash it first to get the sizing out.I think Cabelas has some bulk patch material but I'm not sure.

RE: New GM .54 barrel arrived.............
 

Wal Mart with no 100% cotton pillow tick.. WOW!!! Glad I bought four more yards of the stuff. Other then checking another fabric store I don't know what to tell you.

Some people do shoot old blue jeans (make sure the are not stretch fit as those have poly fibers in them), but that was always too tight for me. Flannel is another material they shoot, but that was too thin.

And denis1112 is right. When you shoot Triple Se7en a wad is necessary and the heat from the powder will smoke a patch. I have never had that problem with Goex or Pyrodex RS.

RE: New GM .54 barrel arrived.............
 

I was going to get the GM 54cal 1-70" twist for my Renegade but I decided to get a new flinter.

RE: New GM .54 barrel arrived.............
 

What do you suggest for a wad when usingpatched balls and2F/777? Remember I'm new at this.....Thanx Harold

RE: New GM .54 barrel arrived.............
 

You can buy wads all over the place. The trouble is some places they are expensive..

You can make your own with a 9/16th hollow hole punch and some 100% construction felt. This is the felt that they pack around windows and door jams to keep the wind out. You just pound out as many as you need. Since felt is 100% wool it really does not burn as you might think. Besides, the point is to protect the patch not the wad. You can spray them with moosemilk if you like. I do that.

There are other places to purchase wads. Track of the Wolf sells them, Circle Fly Wad Company, and others.


http://www.rmcsports.com/rmcsports_cfmfiles/product.cfm?msection=1776

Another trick is to dump your powder down the barrel. Tap the stock on your toe to level the powder load. Then with a small spoon dump approx. 20 gr of Corn Meal down the barrel, then seat your roundball. The corn meal will protect the patch and clean the bore on the way out. The worst thing about it is, its a hassel dealing with the corn meal.

RE: New GM .54 barrel arrived.............
 

I have a small pistol flask with a 15 gr. spout like the use for .31 cal. revolvers filled with cornmeal.I tired cream-of-wheat too,but it kept hanging up in the spout.

RE: New GM .54 barrel arrived.............
 

denis1112 that is an excellent idea. I have a small pistol flask that throws 25 grains I believe for the .44 revolver and that should work just fine...

thanks

RE: New GM .54 barrel arrived.............
 

A few years ago I started using a company in Bristol, TN namedSouthern Bloomer…in business a long timemaking a huge variety of cleaning patches for all sorts of firearm calibers at very reasonable prices, and they’ve added a second line of products called "Muzzleloading Originals".

They have aline of patches &wads invarious calibers, dry and prelubed, etc...their packages look just like Oxyoke Originals packages but has the name Muzzleloader Originals.

I just bought 2000 .40cal x .015" prelubed patches...$3.16/100.
And a couple packs of .60-.69calibers prelubed pillow ticking patches at $3.36/100.

They’re just getting a website going and it is sorely lacking at the moment so the best thing to do is just call 800-655-0342…speak to ‘Winifred’...can't beat the price and you'd swear they were Oxyoke originals.

RE: New GM .54 barrel arrived.............
 

I also use Southern Bloomer shooting patches. I got some of the dry .015 pillow tick. I lube them with a variety of lubes. Here is what the bag looks like. They are good quality and very good price.

RE: New GM .54 barrel arrived.............
 

By the way they are 45-50cal but they are a little over sized and work perfect in my 54cal. They are I think 1 1/4".