.
10-24-2005 | 12:21 PM
#4
Joined: Feb 2003
Posts: 1,964
Likes: 0
From: Rocky Mountains, Colorado
RE: Ultimate Dangerous Game Rifle
Tom,
Don't get upset.
Simply the wrong venue for such a question.
Try:
http://www.accuratereloading.com
Do a Search re DGR's and African Hunting & you should find it.
Otherwise, go to"African Hunting" section and post.
Good luck.
Don't get upset.
Simply the wrong venue for such a question.
Try:
http://www.accuratereloading.com
Do a Search re DGR's and African Hunting & you should find it.
Otherwise, go to"African Hunting" section and post.
Good luck.
10-24-2005 | 06:28 PM
#5
Boone & Crockett
Joined: Feb 2003
Posts: 10,679
Likes: 0
RE: Ultimate Dangerous Game Rifle
If were to build myself a dangerous game rifle it would have the following features.
Bolt action
Push feed design. I choose this for two reasons. #1 I have tried to get a push feed to not feed and I find them every bit as reliable as a controled round feed. #2. If, for some stupid reason, I empty the gun and I am still in danger but not yet dead I can drop a round and chamber it with our having to push it into the magazine first.
Cartridge would likely be either a 458 Lott or a 470 Capstick.
Barrel length would be 24 inches.
Iron sights would be a Marbles universal for the rear with the large peep apreture and front sight would be a hooded and banded ramp with a white bead sight.
Metal finish would be fine bead blasted and parkerized.
Scope would be a 1-5X42 mounted with Talley QR rings and bases.
Stock would definetly be a nicely figured walnut. Hand rubbed oil satin finish or permalyn satin finish. Shaped to fit me with a roll over cheek piece & Pachmyer decelerator pad
Bolt action
Push feed design. I choose this for two reasons. #1 I have tried to get a push feed to not feed and I find them every bit as reliable as a controled round feed. #2. If, for some stupid reason, I empty the gun and I am still in danger but not yet dead I can drop a round and chamber it with our having to push it into the magazine first.
Cartridge would likely be either a 458 Lott or a 470 Capstick.
Barrel length would be 24 inches.
Iron sights would be a Marbles universal for the rear with the large peep apreture and front sight would be a hooded and banded ramp with a white bead sight.
Metal finish would be fine bead blasted and parkerized.
Scope would be a 1-5X42 mounted with Talley QR rings and bases.
Stock would definetly be a nicely figured walnut. Hand rubbed oil satin finish or permalyn satin finish. Shaped to fit me with a roll over cheek piece & Pachmyer decelerator pad
10-24-2005 | 07:25 PM
#7
Fork Horn
Joined: Feb 2003
Posts: 411
Likes: 0
From: Colorado
RE: Ultimate Dangerous Game Rifle
Hi Tom:
DGR rifles span the gamut from useless to useful. If I were looking for the "ultimate" DGR, it would be 500 NE (470 NE min), in a double. The .375 is never going to be the "ultimate" DGR, nor is .416, .458 et al. Call Butchand have him make you the ultimate DGR.
CE
DGR rifles span the gamut from useless to useful. If I were looking for the "ultimate" DGR, it would be 500 NE (470 NE min), in a double. The .375 is never going to be the "ultimate" DGR, nor is .416, .458 et al. Call Butchand have him make you the ultimate DGR.
CE
