Just received my new Defender. WOW, I can't believe the complete absense of hand shock.

OK, I've read the posts on the cam lean associated with the new B-Cams, and want to know what I should be looking at. It appears that the top cam does have some lean in it, but I did not notice it in the bottom cam.

I will be checking the cable routing tonight after reading WWAG's post. Also, I'll measure ATA on both sides of the limbs. Is there anything that can be done if it is only the top cam leaning, without replacing the limbs or changing the cams? Has this been noticed on any of the other B-Cams bows? It seems from the other posts that it is usually in both cams if the bow has this problem.

Thanks