ORIGINAL: Double Lung Em
Just another note, I took measurements of the axle to axle length on each side of the bow and it is approximately 1/8" different.
Need help guys.
Nolan,
If you're seeing an 1/8" difference at brace than something's certainly not quite right and you should get it looked at. I just measured the axle to axle length on 6 Equalizer Cam bows at brace and they are all less than 1/32" from side to side.
On the Equalizer Cam bows center shot is approx. 15/16"-1" from the side of the riser to the middle of the shaft.