If your bow isn't set up this way,, try it and see; The cable coming from the large cable track on the top cam should pass INSIDE the cable coming up from the large cable track on the bottom cam. My Allegiance came to me the opposite way and there was just a bit of lean. I picked up the wife's Defender and noticed that it was cabled the way I outlined and it had VERY little lean. I made the changes to my Allegiance to match the Defender and there is now ZERO lean,, anywhere. I still have my cables crossed below the guard rod but I had to flip my slide upside down to match the new Defender's slide. My slide now has the drop away tab pointing up and the long slot of the slide is towards the riser