Thank you all so much for your compliments. It IS indeed a awesome bow!!
A little later I'll write a post of the bow's performance--not 'mine', the bow!
Was quite busy since I got the bow, today I'm running in and out again.
So first I want to take and document all the measurements, DL, let-off etc,--as manufacture specs and what is on the bow 'sometimes' show different numbers.
I've done a few of these measuremnts last night, the BH is off about 1/8", haven't adjusted the cables myself as yet--plan on twisting ONE turn and see what will happen. The ATA is dead-on, there is ZERO cam lean, the let off is not @ 79%, as the bow is set at 55# and at full draw I'm holding 11#--blah, blah--but soo I'll get to shooting this bow.
Extreme 1, this 'bare' bow should cost somewhere around $900 ~$950 CAN$, depending on the accessories, the package will be an investment.
As for getting a heavier 60#'er--a 'little' tinkering with the cables can get you to 63~65#. I'm willing to assist when you get the approval from the 'better-half'!!
John--John my boy-I know your Dually is a great bow--I'm cerrainly not going to knock on that--but man, wait until you get your hands on the Allegiance--talk about smooth, solid wall, absolutely no effort staying against the wall, and best of all when she flies--she rockets!!! It is a decent toy and I think I'm going to enjoy this bow. Silence has been redefined---I'll now tell my kids--'BOWTECH' when I intend to say 'silent!!
[8D]
Would love to see them (Bowtech) come up with 'modules' down the road, so as the transition the DL a little easier--as against removing both cams. This will make for a faster job--and for Dealers they can help a customer allot faster when the bows DL are different to the customers.
I'll be back soon, gotta run, my wife is at the door!![:@]