jsasker,

Actually, the limbsavers are set up at the same distance from each limb tip but different distances from the respective eccentrics since the idler wheel and single cam are different sizes. This has always seemed like the logical way to set up the limbsavers on this type of single cam but, admittedly, I haven't tinkered with that yet to see if placing the "top" one closer to the idler would make any difference.

Something else I found interesting is that both times I installed the PSE NV system on different bows I had an increase in peak draw weight. On a Buckmaster G2 the peak draw weight went from 68 lbs to 70 lbs and on this Epic Extreme it went from 63 lbs to 66 lbs. Interesting...<img src=icon_smile_wink.gif border=0 align=middle>

This is also my first real experience with a Vertical Pin sight. I have looked at them in the past as well as shot a few bows with them on but I have never actually put one on one of my bows. So far I am reasonably impressed. The real test will come this October 5th...<img src=icon_smile_wink.gif border=0 align=middle>