Thanks everyone for the replies.
The one thing about a coupmpound bow is that the drawlength MUST be right (or very close) or nothing else about the bow matters at all. To get very close measure your wingspan and then divide it by 2.5.
I checked out this measurement and it looks like my draw length is going to be approximately 27".
Gman, you didn't state in your post if you would be using a mechanical release or not so I will assume you are.
Yes I will be using one, which leads to a question about the draw length I just measured. I am looking at using a string loop also. By using a release and string loop, should I actually consider a bow with a draw length slightly shorter than the 27" I measured? Say, 26 1/2"?
Thanks again for all the help.