cayugad, not that many parts. You take the bolt out, and breech out. Take the action out with one screw. Take the trigger out with another screw. Put your breech plug and part of your bolt into some solvent to soak. Scrub your barrel with soapy wather and brush. I do about 30 stroke or less. Run patches thru. Rinse with clear very hot water. Run some more patches thru until dry as a bone. Let sit to dry thoughly while you take a wire brush to the bolt handle and breech. clean out the beech hole. Wipe off the bolt spring. Oil everything and put back together.