I'm late, too, and everyone pretty much nailed it for you. Len made a good account of the problems with most manufacturers running longer-than-stated-on-the-limb drawlengths, Mathews typically runs over by about 3/4", which can account for some of your problem. If you have a 29" cam on it, you can be pretty sure it is close to a 30. I cannot tell if you are shooting a loop or not, this will affect your anchor also, shorten it up as much as possible if you are using one. Your stance definately needs adjustment once you get your drawlength woes taken care of, tho sometimes this all balances out once you get the equipment to fit you correctly. The guys did a good job on this one, go get properly fitted by a reputable tech/coach. You can shoot "shorter" a heck of a lot easier than you can "longer", and unfortunately in your case you are definately too long IMO. Good shooting, P12