I bought a tube when the shop was out of regular Fletch-Tite. Only difference I can tell from the regular is it seems to set up a bit faster. This actually wasn't a good thing for me, since I use an Arizona fletcher that does all three at once. I like a little extra time to get a good glue line on all three before I close it up. Fletched up a 1/2 dozen about 6 months ago & haven't had any come off yet.

Used it on aluminums with Plastifletch vanes. Rubbed the shaft with scotch-brite a bit, then rubbed down the shaft & base of the vanes with a cotton ball soaked in acetone.