Well, unfortunately I am going through the same thing for the second time on my Liberty. The first time I went with the press theory, but the second time I can’t because the only time the bow was in the press was at the dealer's shop when the new limbs were put in. It was three weeks later that I had the bottom limb crack again, with only two weeks until the opener. I did notice that the bottom limb ( which is the limb that cracked ) had a 1/16th gap between the bottom of the limb and the limb pocket. This may be the problem but I am not sure. Bowtech is sending me two new limbs as well as limb pockets to try and solve the problem. I have every bit of confidence that Bowtech will have the new limbs and pockets to me within five days, and I also have every bit of confidence that Bowtech will take all means necessary to fix the problem. Where I am losing my confidence is in the limb cracks. If this third limb cracks I will be pulling out, and trying a new approach.