The only way I could get my TT SH to work properly on my 04 patriot was to have the rest pick up the arrow early on (at least the last 4" of arrow travel).
The hangup with that is the only way to accomplish the extra holding time is to shorten the length of the draw cord, which puts the cables in a bind during the draw cycle.

Initially with less final arrow travel (~2") before the arms came up I could achieve fletching clearance. But when I went to broadhead tune the B/h's were hitting WAY low. With my nock point already at dang near level, lowering it was not an option. But going off a hunch from last years TT fight on my mighty-mite I shortened the draw cord and had the B/h's hitting ~4" higher than fp's. I then lengthened it until I had them close together. This is where the ~4" of arrow travel came in.

Then I said "to heck with all this cable binding" and bought a Drop Zone.
I get fletching clearance with NO excessive bind on the cables and my muzzy phantoms and fieldpoints are together again.
Almost too easy!


Oh and if anybody is wondering about my arrow spine- I'm shooting 28" beman ics 340's, 100 grain tips at 65# pull 29" draw. no spine issues here.