I ordered two dz. GT Hunter Pros and 7-8 out of the two dz had small splinters on the nock end and 3 of the 8 were cracked. Got them replaced with two more dz and they were all ok. As far as weight goes when I first got them they all weighed the same. When I went to cut them I noticed they weren't the same length some might be a 1/16- 1/4 inch longer. Had to square up the nock end nocks wobbled really bad. Once I cut them to size there was 2-3 grns difference. I don't think this is to bad but are advertised at 0.05 grn per dz. They are straight though. I fletched a couple up with Blazer vane and three blade 125 Montecs. They fly great just expected alittle better quality out of a high$ arrow. Took alot of extra work just to get them right. Check em before you fletch em. I was also told by the pro shop the hunter pros are the old 3d pros. Hope eveybody has a safe and fun hunting season. sjb3