HuntingNet.com Forums - View Single Post - do u think this would work
View Single Post
Old 08-10-2004 | 10:50 AM
  #12  
NickSnook
 
Joined: Aug 2004
Posts: 106
Likes: 0
Default RE: do u think this would work

What most people do not understand about the TURBO is that it is not just another gimmick , but rather a new technology of arrow flight.
Every arrow ever made since the dawn of time uses vanes or feathers and only wind resistance to stabilize its flight. WHY??????
About 200 years ago rifling was accidentally invented for bullets and bullets are way more accurate than fletched arrows. WHY??????

The faster an object spins the more resistant to change in direction it becomes. This is why gyroscopes can balance.

The TURBO NOCK instantly spins the arrow from the bowstring with its twisted nock, in the same manner that a bullet is spun from a gun barrel.
The TURBO only needs enough vane area to keep the arrow spinning,and can fly broadheads with 80% less vane than conventional fletching.
This gives tighter groups , less wind drift, flatter trajectory, better penetration.
To stabilize a fixed blade broadhead , like a Muzzy four blade 100 grain , you need three five inch vanes. This is about 7square inches of vane.
The TURBO does the same job (better) with only 1.6 square inch of vane.
NickSnook is offline  
Reply