RE: need help with braodhead alignment
Robby, you have to get the broadhead square with the shaft. The test is to spin them and see if there is any wobble. Sometimes you get them wobble-free by switching them around on the shafts. Today's broadheads are normally accurately made. The problem is usually the inserts themselves. The heads square up to the insert when tightened. If the insert is off a little the head will wobble. Here again, this assuming that the insert is on a straight shaft. Montec makes a squaring tool that hand-machines the end of the insert to square it. This can help. I'm sure others here will explain how to spin test and adjust your heads.