RE: Outback New String Question
Sorry I do not have any pic's !! Seems like Nub or someone else did......don't quite remember who !!
Anyway .......on Mathews straightline cams.......including the new HP cams , like on your Outback ..............there are two "small" holes machined into the side of the cam .........there is one above the axle and one below ! You should see one of them right beside your cam's code....OBHP**** .........take a straight edge and run it across the lower hole and the upper hole..........your straight edge should be dead on parrallel to your bow string !! If the holes line up with your straight edge headed toward your string......your over rotated !! If your straight edge is headed away from your string........your under rotated !!