by twisting up the cable to shorten the length of draw will have little effect but will decreace poundage

if both string and cable stretch equally, this will make the axle to axle length longer, shorten the brace and will decreace poundage.


the best way to get the bow right is to twist the buss cable up to the specified axle to axle length then to twist the string to the spesified draw length.

however it is not uncommon for people to play around with different cable and string lengths to where the bow suits them.

it is kind of hard to get a solo cam bow out of timing considering it only has one cam. what you have to be morer concerned with on solo cams is cam rotation, allways better a little too much than not enough IMO
that is of course me speaking as a speed freak[8D]