RE: mathews outback question
That's correct.....no press ! Just moving the draw stop peg to the 65% hole ! Only tool is a allen wrench ! I haven't tried it on my Outback yet .....but on my LX it basically removed the valley ! With any creep what so ever.....the cam would roll over ! The Outback already has a pretty narrow valley so I imagine setting it to 65% will be the same or worse than the LX ! And in case you didn't know......when you adjust to 65% your draw length will be reduced by 1/2" because your cam stops before it's full rotation !
My LX was 1 fps faster on 30" 80% than it was on 29.5" 65% ......just in case anyone is wondering ! Good Luck !!