ORIGINAL: quebecbowhunter
that may be the case , I have a #4 module in there , it's suppost to be set at 8.5 for a 27 inch draw ,80% let off. But I have it at 6 instead of 8.5. Which gives me around a 27.5 draw length.
I guess I might be too far to the L , but I doubt it??
nick
If you have a PAT#4 module in it and you have the draw stop set on the 6th mark, you are indeed overrotating the cam which can/will cause the problems you're seeing.
If you need a 27.5" draw, you should get a PAT#3.5 module and set the draw stop on the 8th line for 80% let off.
Regards, Pat