HuntingNet.com Forums - View Single Post - ***UPDATE*** Solved the TT Problem, THANKS GUYS~~~~
Old 02-11-2004 | 04:25 PM
  #7  
Buck Magnet's Avatar
Buck Magnet
Senior Member
 
Joined: Feb 2003
Posts: 3,656
Likes: 0
From: Indiana PA USA
Default RE: ***UPDATE*** Solved the TT Problem, THANKS GUYS~~~~

Frank,

I havn't had it out at any longer ranges yet, but I put a couple dozen shots through it at 10 yards and I was putting every arrow in a nickel sized hole. I was only shooting one arrow at a time because I don't want any robinhoods Hopefully tommorow I will get it shooting out to 40 yards or so, that is if some more of this snow melts. But, as of now, the flight looks great, there is no fletch contact, and my 10 yard groups are very good!!!

Navy, The brace height is a measured 7-1/2". The fletching is 3- 4" Duravanes set at a 4 degree right offset. The arrows are 28.25" Gold Tip 3-D Pro 75/95's. The rest is the long bar rest. I was shooting my arrows with 100 grain field points which gives me a total arrow weight of 405.425 grains and a speed of 281 f.p.s.

Rack,
That is very interesting. I am shooting my release off the string, the Liberty is known to throw the nock down a bit on nock travel tests, and my bow is shooting pretty fast at 281 f.p.s. According to what they told you, my set-up should be raising about 2" from the backwall, but that gives me fletch contact. That is kinda strange. My bow set-up is pretty much the exact opposite of what they say works best for it!!!!
Buck Magnet is offline  
Reply