HuntingNet.com Forums - View Single Post - BowTech Cable Clearance Problem..... PICS!!!!
Old 01-18-2004 | 07:51 PM
  #20  
Matt / PA's Avatar
Matt / PA
Giant Nontypical
 
Joined: Feb 2003
Posts: 5,497
Likes: 0
From: Dover, PA USA
Default RE: BowTech Cable Clearance Problem..... PICS!!!!

Jason,
Have you checked your center shot on a gauge? I can't find anywhere where you said yes or no.......my TT is set very far out to the left, in fact it might be aired out. Looks farther out than yours is?.
I haven't had a chance to get mine on a centershot gauge yet so mine was just eyeballed carefully and then tuned, but my string,launcher, and pins are in a direct line........paper is great and shooting very tight groups.

Also if you notice, the clearance at rest is better when you lift the arrow to the launch position by hand...When you just let the arrow hang on the shelf like you are in the pics, the vanes are pointing at a spot lower on the cable which is closer to the centerline of the string.
If I place my 4" feathers cock vane "in" I have some contact........any other orientation and there is no contact.
It's close no doubt about it, but I only have conflict in one arrow position, a position I don't see too many shooters using.
Matt / PA is offline  
Reply