HuntingNet.com Forums - View Single Post - Carbon Arrows and Metal Frames

01-12-2004 | 07:22 AM

#2

Len in Maryland

Joined: Feb 2003

Posts: 1,385

Likes: 0

From: Baltimore Maryland USA

RE: Carbon Arrows and Metal Frames

This is exactly why I prefer another nocking system. If the nocks were not glued in, then you may have had the set screws too tight. This would cause extra internal pressure and possibly degrade the layering. You could also have some arrows that lacked enough adhesive between the layers. It's hard to say at this point.

Had you been using the 'skinny carbons', you more than likely would have only bent the point adapter (if that), and saved the arrow.

Reply

0