I have bent wedge keys, Folded a Cleaning Patch and Layed it in the Barrel Channel to Create “Lift”, Built up in the Stock Channels With Tape, RVT Cement, Etc., Again to Create “Lift” They all Worked, and Got me by. But they were nothing more than a Bandaid on the Problem. The Correct way to ACTUALLY Fix the Problem is how i Showed in my 1st post, Post #4

Of the “Bandaid” Fixes I Mention above, My Favorite, and Simplest to do is the Folded Cleaning Patch, Place it just Forward of the Wedge Lug, Try Different thicknesses til the Wedge Key Tightens up.

Some of the Things I’ve Done



This was a Different issue, I did this to tighten up a tiny bit of Play Back at the Hooked Breech, This is my Rice Barrel in a TC Hawken Stock.