HuntingNet.com Forums - View Single Post - Wool Felt Over Powder Wads (How, and Why i use them)
Old 07-15-2019 | 10:35 AM
  #1  
Idaholewis's Avatar
Idaholewis
Fork Horn
 
Joined: Mar 2016
Posts: 422
Likes: 0
From: North Idaho
Default Wool Felt Over Powder Wads (How, and Why i use them)

As the title says, This is about 1/8” Wool Felt Over Powder Wads, How and Why i use them. Believe me Folks, These things work!! 99% of the Bullets i shoot, You can count on there being an 1/8” Wool Felt Over Powder Wad behind it, Protecting My Bullet Bases, and Sealing the Gasses Behind my Bullets. Those of you that have seen my YouTube Videos and See my Targets, These 1/8” Wool Felt Wads are a MAJOR Player in my Target Shooting Success. I have tried every Wad material known, Cork, Vege Fiber, Nitro Cards, LDPE Poly, Milk Carton, Various thicknesses ranging from .015, .030, .060, and .135, I have Wad Punches from High end Press mounted, to Hammer Struck, I Make a LOT of my Own Wads. The 1 material that i can COUNT on Time after time is 1/8” Wool Felt, Wether it be Grease Groove Bullets, Paper Patch, Jacketed, Solid, It doesn’t matter? 1/8” Wool Felt works for me EVERYTIME! Every other Material has been Hit & Miss with me, I have a Good outing​​​​​, then a Bad one?? 1/8” Wool felt is the Most Consistent Wad Material i have ever used! If i have a Bad outing with Wool Felt, i am Confident that the Problem is Elsewhere, NOT in the Wad. Try 1/8” Wool Felt, AWESOME Stuff Behind These Muzzleloader Bullets!!








Last edited by Idaholewis; 07-15-2019 at 10:41 AM.
Idaholewis is offline  
Reply