Originally Posted by
wild bill g
No disrespect No Mercy but I was told by a bullet maker who shot bench rest. That as long as the ring at the base of the bullet is not marked Other marks on the bullet do not matter. As for the hammer bullt puller I pitched it more of a pain then it was worth. Besides I had to many bullets with deformed tips from that thing.
foam ear plug solves that! The key to accuracy is consistency, use the same pressure seating primers, keep cases as close to identical as possible, seat your bullets the same way every time (start the bullet, spin case 120 degrees, seat a bit more, spin case 120 degrees, finish seating, keeps runout to a minimum) its not hard, just a lot of little tidbits that add up, if all your bullets are not exactly alike, it will have an affect.
RR