Originally Posted by
hunters_life
54bore, unless your bore gets tighter on the way down, all bullets will seem a little easier from the middle down as the bullet shapes to the bore. Knurling may help a small bit in your case but more than likely not. My Renegade was a rare one. It is identical bore dimension all the way down. I have found no deviation whatsoever. You usually find it a little tighter or open on one side or the other. But even with concentric dimensions my full bore maxi balls feel a little easier after a few inches.
My .50 Green Mountain LRH Sounds like the Renegade you speak of here, my new Custom bullet for it (Bullshop 460 Grain Similiar bullet) starts tight and stays tight all the way to the powder