View Single Post
Old 07-05-2017, 09:19 AM
Join Date: Jun 2017
Posts: 44

Muzzle was very good about doing an exchange on the cap GPR, the replacement is as rock steady as the flint...kudos.

I still couldn't get the old SS liner out to replace, but in the process ended up opening up the touch hole, greater than 1.6mm (.063", the original 1/16") but less than 2.0mm (.08", 1/12").

I'll try this and see how it performs, if not then in goes the new liner.

Last edited by NerdLord; 07-05-2017 at 09:25 AM.
NerdLord is offline