Originally Posted by
super_hunt54
Sabot, the absolute best thing I have found to assure absolutely NO oils are left is Brake Cleaner. Just make sure you don't get any on ANYTHING other than the steel. That stuff will really do a number on plastics and wood. Pretty darn cheap and much easier than most other degreasers and boiling methods. You can grab a can at pretty much any auto supply. It's what the stuff is designed for. Taking the oil off disc rotors before installation. Leaving the oil on will crystallize your pads.
Yes, I have tried it but unless you heat the barrel you will never empty the pores + the heated pores really helps the Dyna-Tek get into the pores in the bore.
And according to the MDS sheet there are petroleum additives in Brake Cleaner and that is what I am trying to get rid of...
Additionally the boiling water removes all plastic fouling without an effort at all. Just got to get the bore completely dry with air than while the barrel is very hot apply the Dyna-Tek.