HuntingNet.com Forums - View Single Post - The Winchester 1906 project
Thread
:
The Winchester 1906 project
View Single Post
10-02-2015, 06:32 AM
#
4
TINCANBANDIT
Spike
Join Date: Oct 2015
Posts: 22
The dovetails holding the magazine tube are very shallow and short of welding them up and recutting them I was left with few options. So I used a thin skim of JB Weld
The stocks were finished with Tru-Oil, 2 coats and a buffing with rubbing compound
Finished
Reply
TINCANBANDIT
View Public Profile
Send a private message to TINCANBANDIT
Find More Posts by TINCANBANDIT