Try looking at these, here is CVA's total guns offered, just click on the gun you like and a full description will follow, if you find one you like check around, CVA prices kind of high.
http://www.cva.com/CVA-store.php?shop=Muzzleloaders#l
If you decide on a CVA gun and want to shoot BH 209, you will need one of these:
http://www.cva.com/CVA-store.php?sho...eech%20Plugs#l
Whatever you get try a TEZ 250 or 290 grain Barnes Bullet, also a 44 Cal Hornady 300 grain XTP, with a harvester green crush rib sabot and a Hornady 250 grain sst/ml with a T/C superglide sabot (Yellow) works good in my gun, TEZ is the Best.
I would highly recommend using Blackhorn 209 Powder, You clean up with regular centerfire solvents and oil, otherwise you will have to use soap and water
If you get a CVA BH 209 Breech Plug you will need a 1/8" drill bit to clean the fire channel, use finger pressure only, wrap electrical tape around the shank until you can grip the bit. I have an Accura V2 the Original plug uses a .116 or a #32 drill bit, original plugs are more for Powder Pellets, which I would not recommend.
Whenever you decide what to buy post back and let us know what your setup is.
Also as stated below by Miketodd58 the CVA triggers are nice my accura V2 has an adjustable trigger, but I have never needed it.