Ooooookkkk.... I had the straight end tensioned on the "pivot" spring in front of the trigger like you showed, but the other side I had the "U" part (like what the hammer spring does on the back of the hammer) on the bottom of the hammer so it was around that right near the coil of the hammer spring. So I need to put that "U" end around the trigger and not the bottom of the hammer.... Ok.... That makes sense if I'm understanding correct. I'm not home at the moment but I'll try that as soon as I step in the door! Thanks a ton! Is there anywhere specific it goes around the trigger? Like a groove or does it slide?