Take a look at the Lee kits. I do believe someone starting out needs to begin with a single stage press to get the basics of reloading down. An alternative would be a Lee classic cast turret press. You can either use them as a single stage or an auto indexing press depending on if you have the auto index bar installed or not. A lot of people will bash the Lee brand products, but I have had good luck with them. I did replace their safety scale with a RCBS 10-10. Read through a couple of different reloading manuals. Lee and Lyman are a couple of good ones to start with. Keep in mind that every brand manual will recommend their own products. Go slow and don't hesitate to post more questions. Good luck. HD.