Originally Posted by
bugsNbows
Yep, NO movement is tolerable. I'd remove the bases and remount to gun (using Blue Locktite) and torque to specs. Then, reset the scope into rings, level and align the reticle and set ER and torque to specs (no locktite needed here). BTW, if they are cheap / junk bases / rings, replace with a good quality set.
+1...cheap rings and bases cause far more trouble than the $ they "save"....investing a few extra dollars in a good set is well worth it....Warne, Millet, Lupy, Redfield...are my fav's (in that order)...also, buy steel not aluminum in my opinion.