Originally Posted by
lemoyne
By the time you get the trigger redone so its decent [a lot of them are not] and the Breach plug revamped so you can use Blackhorn, Well I would look at the TC Impact and even some of the CVA rifles first.
I will admit that the trigger needs work but at the range the trigger can be set so there is absolutely no creep. I can only guess the pull to be in the 3 pound range when the trigger is set. Setting the trigger only requires you to pre-pull the travel out of the trigger while holding your thumb over the top of the trigger. I have found that when this is done properly you will not be able to push forward on the rear of the hammer to make it fire. Pulling the trigger too far will permit you to push on the rear of the hammer and cause the hammer to fall. The one problem is that you will not be able to set the safety when you set the trigger this way. Otherwise the trigger does have a lot of travel to it but is not extreamely heavy. As far as the breech plug is concerned, all of the Traditions inlines that I own have had NO breech plug work done to them and are COMPLETELY reliable using Blackorn 209 with any regular or magnum 209 shotgun primers