I used this method to adjust tiller on my single cam bow, a old Mission X3. With both limb bolts out 1/2 turn from bottomed out, the pin did climb during the draw. Adjusted the top out 1/4 and the lower in 1/4, and it was better. Then bottomed the lower and backed the top out another 1/4, and this seemed to keep the pin steady. Had to adjust the rest as the nock point changed. Shot a couple shots, adjusted sights, and shot some to see how the bow handled. It seemed to be quieter, less movement through the shot, and arrows were flying straight and grouping well.