Originally Posted by
cayugad
Before I start casting, I clean the mold with alcohol. Then when it's dry I apply my mold lube. It looks like either your lead is not hot enough, or your mold is too cool. Turn the heat up a little more. Like Lee said, hold the corner of the mold in the lead. Count to thirty. Lift the mold. The lead should fall off back in the pot. And when you get casting stick with it. Do not stop to admire your... work. It takes time but when you find the groove, cast like the devil.
Sounds like most have hit it on the head. The only thing I could add is instead of dipping your mold between castings, I just let it rest on the top of the melting between drops and am good to go.
Cayugad is right on cleaning between casting sessions with alcohol and then spraying with drop out spray. Makes a huge difference!!!!!